Printer Control and PWO Printer Control - Revision history

Freddy at 15:54, 25 July 2025

2025-07-25T15:54:09Z

Amohammad at 21:10, 6 May 2024

2024-05-06T21:10:30Z

Curtis: Curtis moved page Printercontrol to Printer Control and PWO Printer Control

2022-01-05T17:16:07Z

Curtis moved page Printercontrol to Printer Control and PWO Printer Control

Curtis at 17:15, 5 January 2022

2022-01-05T17:15:35Z

Curtis at 16:41, 5 January 2022

2022-01-05T16:41:41Z

Curtis: Created page with "{TOC} ===General Information=== '''Default Menu Location''': Maintain >> System >> Printer Control '''Screen Name''': PRINTCON '''20/20 URL''': PrinterControl_S.htm ''..."

2022-01-05T16:38:40Z

Created page with "{TOC} ===General Information=== '''Default Menu Location''': Maintain >> System >> Printer Control '''Screen Name''': PRINTCON '''20/20 URL''': PrinterControl_S.htm ''..."

New page

{TOC}

===General Information===

'''Default Menu Location''': Maintain >> System >> Printer Control

'''Screen Name''': PRINTCON

'''20/20 URL''': PrinterControl_S.htm

'''Function:''' Each networked label printer must be set up in the Printer Control screen of Adjutant. Adjutant will not properly communicate with the printer without it being set up in this screen first. Laser Printers used in auto-processing Production Work Orders and laser form labels must also be set up here.

===Master===

[[File:Printer_Control_Master_Tab.png]]

The Short Name must be a number.

The UNC Name is the name of the printer as it is listed on the network (\\domainname\printername).
It can also be listed as an IP Address.

If labels are being FTP'd to the printer, then check the '''FTP to Printer''' box. The User ID and Password are only required if the printer has been setup to require them. The FTP batch size allows you to limit the number of labels sent in any one file to the printer.

The '''Scale Factor''' field should be set to 1 for printers using a 203 dpi setting. All other printers should be scaled according to that setting. For example, a printer using 300 dpi should have a scale factor of 1.478.

===PWO Control===

Set up default printers for specific plants and printers in the PWO Control tab.

Select the printer you want to add in the bottom grid.

Select the Plant and Department from the drop-down fields and then click the green plus icon to add the printer.

The [http://www.abiscorp.com/faq/index.php?title=Printpworeport Print Production Work Order] screen will direct each PWO to the corresponding printer based on the setup here.

[[File:Printer_Control_PWO_Control_Tab.png]]

===Tips===

The UNC Name for any printer that is connected directly to a terminal must be LOCAL.

[[Category:Item Control]]

← Older revision		Revision as of 15:54, 25 July 2025
Line 44:		Line 44:


−	[[Category:System ~~Admin~~]]	+	[[Category:System Manager]]
	[[Category:Production]]		[[Category:Production]]

@@ Line 1: / Line 1: @@
-{TOC}
+__NOTOC__
 ===General Information===
@@ Line 41: / Line 40: @@
-[[Category:Item Control]]
+[[Category:System Admin]]

@@ Line 1: / Line 1: @@
 __NOTOC__
 ===General Information===
@@ Line 9: / Line 10: @@
 '''Function:'''  Each networked label printer must be set up in the Printer Control screen of Adjutant.  Adjutant will not properly communicate with the printer without it being set up in this screen first. Laser Printers used in auto-processing Production Work Orders and laser form labels must also be set up here.
 ===Master===
 The Short Name must be a number.
@@ Line 22: / Line 24: @@
 The '''Scale Factor''' field should be set to 1 for printers using a 203 dpi setting. All other printers should be scaled according to that setting. For example, a printer using 300 dpi should have a scale factor of 1.478.
 ===PWO Control===
@@ Line 34: / Line 37: @@
 [[File:Printer_Control_PWO_Control_Tab.png]]
 ===Tips===

← Older revision	Revision as of 17:16, 5 January 2022
(No difference)

@@ Line 28: / Line 28: @@
 Set up default printers for specific plants and printers in the PWO Control tab.
-Select the printer you want to add in the bottom grid.
+Select the printer you want to add in the bottom grid and choose "Edit".
-Select the Plant and Department from the drop-down fields and then click the green plus icon to add the printer.
+Select the Plant and Department from the drop-down fields and then click the Add PWO Button.
 The [http://www.abiscorp.com/faq/index.php?title=Printpworeport Print Production Work Order] screen will direct each PWO to the corresponding printer based on the setup here.