Item Control Setup Options

Modified on Fri, 08 May 2020 11:52 by David Thorpe Categorized as Item Control, Setup Options
===Setup Options & Definitions===

'''ADJTRANSACTION''' - ADJTRANSACTION

'''ALLRES''' - Post time to any resource on the Time and Material Entry screen (no assignments necessary).

'''AMS''' - Integration with an AMS roll former controller (Eclipse Software) is being used.

'''CCBINSORT''' - If enabled handles 99.99.xxx bins special (left pads 99 blocks to two chars each to make number sorts work correctly.

'''CCNITEINV2''' - Option to generate niteinv2 records after commits complete.  Records made for each item/loctid committed.

'''CCOUNTCHNGWHSE''' - CCOUNTCHNGWHSE

'''CCOUNTWHSECHNG''' - Without setup option, scanner will flag scans in otherwhse as invalid.

'''CCOUNTWHSECHNG''' - Without setup option, scanner will flag scans in otherwhse as invalid.

'''CFSHOWTOTAL''' - Option to show total band, default is off.

'''CLEANSCRAP''' - CLEANSCRAP

'''COILLABELLOG''' - Add print button to display coil screen to print a one-off tag. Printed when COILLABELLOG CID option is set.

'''COILLABELX2''' - If set, default the copies on CoilReceipt screen to 2.

'''COILPROD''' - If set, coils must have color and gauge filled out in profile table. PWOs are grouped by GAUGE and COLOR.

'''COILPROFILE''' - Adds filters for Width, Color, Material, and Gauge.

'''CONSUMABLE''' - CONSUMABLE

'''COPYATTRIBVAL''' - If set and item is copied, all underlying tables will be copied also. Table list assroute, catalog, cwinfo, hazmat, profile, udq, wirerope, amsprod, bom, dotnote, varunit, itemstdcost

'''DEFAULTLOT''' - Defaults the Lot flag to checked on new inventory items in the Item Master.

'''DIRITEMDET''' - DIRITEMDET

'''EDITLINK''' - EDITLINK

'''FLATTENSER''' - FLATTENSER

'''IAADJZEROLOT''' - If set, allows adjusting inventory into a lot that has no qty.

'''IAREQDEPT''' - If found, require department to adjust inventory.

'''ICNEWCOST''' - Change Scrap screen to use Cost Tiers if ICNEWCOST enabled.

'''ICSEPBYOWNER''' - If CID option ICSEPBYOWNER is enabled, and item has MULTIOWNER attribute, then the cost by assembled part owner is captured in ITEMMOH, ITEMMOD.

'''IGNORELESSONE''' - If set and count diff is less than one, then do not make any inventory changes.  NOT make adjustments to coil when adjusted amount is less than 1.

'''IMITEMCAT''' - Require the Item Transaction Category in Item Master. The desired reflex is when adding a new item, ITEMCAT should be empty and require user to make an entry.

'''IMNOZERO''' - Option to remove zero qty on hand lots from lot tab  (They appear if WIP Qty<>0 right now). If set, remove onhand = 0 lots from Lot Tab.

'''ITEMEXACT''' - Displays item in item master when an exact match is entered, regardless if there are other items that may be a partial match.

'''ITEMMULTINOTE''' - Change note screen to have 5 notes (SO, RFQ, PO, PWO and Inv).

'''ITEMSPECCHAR''' - If set, allow expanded character set in item codes.

'''LABELDEFPRINT''' - If enabled, print coil tags to user's default printer. Skip Whse Coil tag printer logic.

'''LABELDIFF''' - New screen  to allow setup of custom inventory labels for custom/item pairs. Change InvLabel generation points to use custom label if found (LABELDIFF CID option enables).

'''LASERCOIL''' - Allows printing of laser coil tag labels from PO Receipt screen.

'''LASERCOIL1''' - If this and LASERCOIL are on, only print 1 laser label for each coil (default is 2) from Coil Finder.

'''MODBOWLUSERWHSE''' - MODBOWLUSERWHSE

'''MODBREAKFACTOR''' - MODBREAKFACTOR

'''MODBYSTKONLY''' - MODBYSTKONLY

'''MODBYSTKQTY''' - If enabled, default the AllocbyQty radio button to be selected when screen opens.

'''MODBYSTOCKONLY''' - MODBYSTOCKONLY

'''MODDUMP''' - Troubleshoot issues with new cost less than original cost when processing items in large groups.  Make changes to original cost logic when Check All button used.  Add option to dump out file to z9mod temp file

'''MODNODEL''' - Option to disable Delete button on Mod Processor.

'''MODNOLABEL''' - If set, suppress printing of all labels from Mod Processor

'''MODNOLABELALL''' - Suppress printing of all labels.

'''MODNONSTK''' - If set, non stock items can be created by changing item code at bottom, otherwise non stock items cannot be created by changing item codes.

'''MODSAMELOT''' - Automatically uses the existing lot number as the new lot number in the Modification Processor.

'''MODTRANSACTION''' - MODTRANSACTION

'''MPNOQTY''' - If set then don't set qtytouse,costtouser to max value on extra items when selected  (leave at zero)

'''NEWITEMLOOKUP''' - If set, display first 500 items by item order if ? used in description field.

'''NEWLOOKUP''' - NEWLOOKUP

'''NEWMSNNUM''' - If set, then map project drop folders to Project Number instead of Project ID.

'''NOAVGCOST''' - NOAVGCOST

'''ONHANDALL''' - If enabled and all is selected as qty filter, 0 qty records will be added for all other matching stk items that are not in report.

'''ONHANDBINBYLOT''' - ONHANDBINBYLOT

'''ONHANDRECDATE''' - If set, the fill out RECDATE in cursor with oldest accounting date from itemact PR record (for lot and serial items)

'''ONHANDSOLOT''' - If set then fill out new soalloc field with allocation info.

'''ONUSAGE''' - Add setup option to check Usage box by default.

'''POCOILLOTCHK''' - If set, check for duplicate coil lot numbers in same whse.  Do not allow receipt of duplicate lots, warn if modifcation will create duplicate lots with qty <> 0.

'''POSPLITTAX''' - Split tax out on itemact record if POSPLITTAX is enabled.

'''PLUSEBASE''' - If set, then use base cost as input to costing functions.

'''PWODATEIN''' - Change adddate of ItemTrack record to oldest add date of used lot controlled material. CID option PWODATEIN enables change.

'''QADDQCOST''' - Uses base cost as quoted cost if adding an item on Basics tab. Uses today as quote date, and today + 90 days as quote expiration date.

'''QUICKADDITEM''' - Default to Basics tab on Item Master when adding item on

'''REPBASE''' - Primarily used in water districts. Reprice base, if you change base cost and it is not a misc item, it asks if you would like to reprice open service orders that are not tied to a PO using new base costs.

'''REQLINKPO''' - Requires a PO link that has been received before it can be shipped.

'''SHOWCOST''' - Displays cost field on the Sales Order.

'''SHOWKEY''' - Show database internal key on screen.

'''SINGLEBAG''' - Single Inventory Package in System

'''SKIPALLOC''' - SKIPALLOC

'''SKIPCALCWIP''' - Skip WIP lookup during processing of grid .

'''SMARTCOMM''' - If SMARTCOMM option set, don't check Product and Machine, but do check Machine Name and Profile.  Hide unneeded fields.

'''SOCFIXEDPRICE''' - The controlling quantity price adjustment is set to the customer's contract price. Other configuration options do not affect the price.

'''STKADJUSTGL''' - Add GL account to Adjust screen. If filled out, this account is used in place of IC Clearing account.

'''TSPRODONLY''' - TSPRODONLY

'''UBERLABEL''' - UBERLABEL

'''USAGESELLCOUNT''' - Add logic to calculate the number of times sold (Number of unique Orders for matching S type Itemact records). CID option USAGESELLCOUNT enables logic.

'''USEBINS''' - Bins added to Ship SO, PWO Yields and inputs. USEBINS is Setup Option Control. Ibinname is label caption code.

'''VERBROSE''' - Turns on the verose checker on time entry.

'''WHSEACCT''' - Change Whse screen to allow entry of accts for owners. Create new class to get correct accts from OHF/WhseAcct/CID. Add logic to PO Rec to GL block of super batch. Add code to all other Inv/WIP prcesses in Superbatch.
Meta Keywords:
Meta Description:
Change Comment:
Desktop Adjutant

Navigation¶

Item Control Setup Options
