Welcome Guest, you are in: <root>AFIweb • Login

Page History: TRACKLENGTH

Compare Page Revisions

82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Current 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

« Older Revision - Back to Page History - Newer Revision »

Page Revision: Wed, 06 May 2020 15:31

Item Master¶

Settings Tab¶

ID1: Define the primary way to segment inventory. For example, enter 'Length' to track different lengths under one item code. ID2: Define a second measurement (if needed). For example, you can track 'Length' under ID1 and use ID2 for 'Width' to track different sizes of plate.

#Lot tab¶

Lengths: This is where you can see the different ID1/ID2 combinations and set up formulas to calculate base cost and weight based on the different lengths and widths -- assuming ID1 is Length and ID2 is width.

Calculations¶

Cost Calc: This calculation can determine a specific base cost for each ID1/ID2 combination. This base cost can be used for customer pricing. For example, a customer tier of WALKIN can be set up to pay 75% over this base cost. Available fields for the calculation are defined in the Factors section below.

Factors¶

Cost Factor: This can be used to set up a certain cost as it pertains to the ID1/ID2 combination. The expression is ""cf"" if you want to use it in a calculation. For example, if ID1 represents length, the amount entered here can reference a certain base cost per foot or inch. This calculation would be entered as 'id1*cf' to calculate the base cost per foot, assuming ID1= Length and cf= base cost per foot.

id1 - References the ID1 field id2 - References the ID2 field