Page History: Item Control Setup Options
Compare Page Revisions
Page Revision: Fri, 24 Jun 2016 09:37
Setup Options & Definitions
ADJTRANSACTION - ADJTRANSACTION
ALLRES - Post time to any resource on the Time and Material Entry screen (no assignments necessary).
AMS - Integration with an AMS roll former controller (Eclipse Software) is being used.
CCBINSORT - If enabled handles 99.99.xxx bins special (left pads 99 blocks to two chars each to make number sorts work correctly.
CCNITEINV2 - Option to generate niteinv2 records after commits complete. Records made for each item/loctid committed.
CCOUNTCHNGWHSE - CCOUNTCHNGWHSE
CCOUNTWHSECHNG - Without setup option, scanner will flag scans in otherwhse as invalid.
CCOUNTWHSECHNG - Without setup option, scanner will flag scans in otherwhse as invalid.
CFSHOWTOTAL - Option to show total band, default is off.
CLEANSCRAP - CLEANSCRAP
COILLABELLOG - Add print button to display coil screen to print a one-off tag. Printed when COILLABELLOG CID option is set.
COILLABELX2 - If set, default the copies on CoilReceipt screen to 2.
COILPROD - If set, coils must have color and gauge filled out in profile table. PWOs are grouped by GAUGE and COLOR.
COILPROFILE - Adds filters for Width, Color, Material, and Gauge.
CONSUMABLE - CONSUMABLE
COPYATTRIBVAL - If set and item is copied, all underlying tables will be copied also. Table list assroute, catalog, cwinfo, hazmat, profile, udq, wirerope, amsprod, bom, dotnote, varunit, itemstdcost
DEFAULTLOT - Defaults the Lot flag to checked on new inventory items in the Item Master.
DIRITEMDET - DIRITEMDET
FLATTENSER - FLATTENSER
IAADJZEROLOT - If set, allows adjusting inventory into a lot that has no qty.
IAREQDEPT - If found, require department to adjust inventory.
ICNEWCOST - Change Scrap screen to use Cost Tiers if ICNEWCOST enabled.
IGNORELESSONE - If set and count diff is less than one, then do not make any inventory changes. NOT make adjustments to coil when adjusted amount is less than 1.
IMITEMCAT - Require the Item Transaction Category in Item Master. The desired reflex is when adding a new item, ITEMCAT should be empty and require user to make an entry.
IMNOZERO - Option to remove zero qty on hand lots from lot tab (They appear if WIP Qty<>0 right now). If set, remove onhand = 0 lots from Lot Tab.
ITEMEXACT - Displays item in item master when an exact match is entered, regardless if there are other items that may be a partial match.
ITEMMULTINOTE - Change note screen to have 5 notes (SO, RFQ, PO, PWO and Inv).
ITEMSPECCHAR - If set, allow expanded character set in item codes.
LABELDEFPRINT - If enabled, print coil tags to user's default printer. Skip Whse Coil tag printer logic.
LASERCOIL - Allows printing of laser coil tag labels from PO Receipt screen.
LASERCOIL1 - If this and LASERCOIL are on, only print 1 laser label for each coil (default is 2) from Coil Finder.
MODBREAKFACTOR - MODBREAKFACTOR
MODBYSTKONLY - MODBYSTKONLY
MODBYSTKQTY - If enabled, default the AllocbyQty radio button to be selected when screen opens.
MODBYSTOCKONLY - MODBYSTOCKONLY
MODDUMP - Troubleshoot issues with new cost less than original cost when processing items in large groups. Make changes to original cost logic when Check All button used. Add option to dump out file to z9mod temp file
MODNODEL - Option to disable Delete button on Mod Processor.
MODNOLABEL - If set, suppress printing of all labels from Mod Processor
MODNOLABELALL - Suppress printing of all labels.
MODNONSTK - If set, non stock items can be created by changing item code at bottom, otherwise non stock items cannot be created by changing item codes.
MODSAMELOT - Automatically uses the existing lot number as the new lot number in the Modification Processor.
MODTRANSACTION - MODTRANSACTION
MPNOQTY - If set then don't set qtytouse,costtouser to max value on extra items when selected (leave at zero)
NEWITEMLOOKUP - If set, display first 500 items by item order if ? used in description field.
NEWLOOKUP - NEWLOOKUP
NOAVGCOST - NOAVGCOST
ONHANDALL - If enabled and all is selected as qty filter, 0 qty records will be added for all other matching stk items that are not in report.
ONHANDBINBYLOT - ONHANDBINBYLOT
ONHANDRECDATE - If set, the fill out RECDATE in cursor with oldest accounting date from itemact PR record (for lot and serial items)
ONHANDSOLOT - If set then fill out new soalloc field with allocation info.
ONUSAGE - Add setup option to check Usage box by default.
POCOILLOTCHK - If set, check for duplicate coil lot numbers in same whse. Do not allow receipt of duplicate lots, warn if modifcation will create duplicate lots with qty <> 0.
QADDQCOST - Uses base cost as quoted cost if adding an item on Basics tab. Uses today as quote date, and today + 90 days as quote expiration date.
QUICKADDITEM - Default to Basics tab on Item Master when adding item on
REPBASE - Primarily used in water districts. Reprice base, if you change base cost and it is not a misc item, it asks if you would like to reprice open service orders that are not tied to a PO using new base costs.
SHOWCOST - Displays cost field on the Sales Order.
SINGLEBAG - Single Inventory Package in System
SKIPALLOC - SKIPALLOC
SKIPCALCWIP - Skip WIP lookup during processing of grid .
SMARTCOMM - If SMARTCOMM option set, don't check Product and Machine, but do check Machine Name and Profile. Hide unneeded fields.
SOCFIXEDPRICE - The controlling quantity price adjustment is set to the customer's contract price. Other configuration options do not affect the price.
STKADJUSTGL - Add GL account to Adjust screen. If filled out, this account is used in place of IC Clearing account.
UBERLABEL - UBERLABEL
WHSEACCT - Change Whse screen to allow entry of accts for owners. Create new class to get correct accts from OHF/WhseAcct/CID. Add logic to PO Rec to GL block of super batch. Add code to all other Inv/WIP prcesses in Superbatch.
