Tap Setup

Modified on Wed, 14 Jun 2017 13:45 by Ryan Horne — Categorized as: Tapping and Inspection, Water and Wastewater Services


General Description

Default Menu Location: Transaction >> Tapping >> Tap Setup

Screen Name: TAPENTRY

Function: The Tap Setup Screen is used to create new tap and inspection service orders, enter builder payments, and maintain legal (S-B-L-T) locations of addresses.



Physical/Legal/Tap

The first tab on the Tap Entry screen will display all addresses (linked SHIPTO children) in the District you select at the top of the screen.

Image


You can edit existing addresses and add new addresses from this screen.

Underneath the District ID and Name fields are two other fields that will filter the list of addresses:



Please see the below videos for instructions on how to add builders and subdivisions to Adjutant.

Payment

The Payment tab/screen is used to apply a check/payment to a single or multiple taps.

Image
Select a Builder from the dropdown menu at the top and then click the ADD icon to enter a new payment.

See the Instructions section on this page for more details on this tab.

Addl Payment - This will display a grid that shows additional payment tasks that can be generated from Tap Screen. To add tasks to this list, select the Additional Payments service order group on the standard task setup.

Pay Existing - This will allow applying a payment towards pre-exisitng "Additional Payment" type tasks for the selected connection(s).

Instructions

Edit an Existing Address

STEP 1: Enter the District ID or Name in the fields at the top of the screen.

STEP 2: Locate the address you want to edit within the grid. You can filter by Builder, Subdivision, or by anything in the street number or name by using the Street Address Filter.

STEP 3: After selecting the address in the grid, click the EDIT icon to edit the corresponding fields for the address.

STEP 4: Click SAVE once finished editing.

Add a New Address

STEP 1: Enter the District ID or Name in the fields at the top of the screen.

STEP 2: Click the ADD icon.

STEP 3: Fill out as much information as possible and then click SAVE.

Please note that all information from the previously selected address will remain in the fields when you start adding. This is done on purpose so that you only have to change a few fields when adding many street addresses at the same time (all on one street for example).

You can specify the address's ID or you can leave that field blank and let the system assign an ID for you. The ID will be validated against others in the system so that you do not create a duplicate. The address is NOT validated.

Set up a new tap:



Enter legal and tap size information



STEP 1: Enter the District's ID or Name in the District fields.

Image

STEP 2: Select the address in the grid. Click Edit .

Image

STEP 3: Enter the corresponding legal info (S-B-L-T) and then select the Tap Size from the drop-down menu. Enter the Fee if the tap is a Commercial Tap per quote.

Image

STEP 4: Enter the Builder's name in the Builder field (located under the Address field in the middle-left portion of the screen).

Image

STEP 5: Enter any other needed information, such as Address info, Key Map, Cross Street, etc

STEP 6: Click Save and move to the Payment tab.

Enter Payment Information



STEP 7: Click the "new" button in the upper right hand corner (the user must ensure there is a builder selected before creating a new payment).

Image

STEP 8: This will immediately take the user to the "Payment Date" field. This date may vary depending on the company's preference (date could be the deposit date, the check date, etc).

Image

STEP 9: Next, enter the check number for this payment. Note: One check can be used to pay multiple taps. However, each separate check will require separate entry.

Image

STEP 10: Next, enter the check amount.

Image

STEP 11: If this payment is associated with an existing contract, use the Contract drop down box to associate the appropriate contract.

Image

STEP 12: The "Generate SvrOrds" box on the left side of the screen is used to generate various associated service orders for the taps (one example of this would be inspections required for the tap).

Image

STEP 13: Once all of the check and service order information has been entered, now the user will select the addresses (taps) the payment was made for.

Image

STEP 14: Note: In order to save the payment, the 'Check Amount' and 'Total Applied" must be equal, and the 'Remaining Balance' must be 0.

Image

STEP 15: The final step is to press the save button in the upper right hand portion of the screen. Upon saving, the user will be prompted to print working service orders and the system will notify the user of the service orders generated by this payment.

Please note that you are able to modify some of the Service Order and the Builder's payment address information on the third and fourth tabs. You must enter this information BEFORE SAVING.

FAQ

Q: How do I set up a new subdivision?

A: Watch this video.



Q: How do I set up a new builder?

A: Watch this video.



Q: How do I set up a new tap size?

A: Watch this video.



Q: How do I add to the list of Inspections on the Payment tab?

A: Set the Service Group to Inspections on the corresponding trouble code.

On the Standard Task Maintenance screen (aka Trouble Codes), there is a field named Svr Grp on the Options tab. Make sure this field is set to Inspections.

A screenshot can be viewed here.